Additional information
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | G4 |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Tanie Erotyczna bielizna intymna
Sklep online tanie
415.00 $
85 in stock
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | G4 |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Alcohol base material without fan electrification controller function description
The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to conventional heating, temperature measurement, temperature control, inside igniter ignition high-voltage output, electromagnetic pump In addition to the functions such as built-in, there is also a model with its own precision fire regulation, which can realize stepless precision adjustment and start/stop control of the oil pump flow. This function and gear position adjustment realizes no need to switch, fire with heart, start and stop freely. Effect. At the same time, it is equipped with a self-resetting rocker switch or a three-speed self-reset switch the built-in benefits, the joints effectively solve the problem of water inlet, to achieve more convenient gear position control. There are also models with infrared anti-air burning to choose from, easy to achieve considerable energy savings.
The controller is quick and easy to install, stable, adaptable and user-friendly, and cost-effective enough to be a replacement for the alcohol-based fuel gasifier industry. Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V
3, the service life: the number of actions is not less than 100,000 times 4, heating output power: no more than 2000W
5, ignition high voltage output: built-in igniter, high voltage line lead
6, electromagnetic pump output: AC220V, power is not more than 100W, full power range PWM voltage regulation electromagnetic pump is installed inside the controller 7, temperature probe: K-type thermocouple
8, personality function: one word rocker switch or three-speed self-reset switch built-in Precision firepower adjustment function optional Infrared air defense function optional Wiring instructions
1. External lead plug wire: Connect 220V AC power supply, install leakage circuit breaker and a bipolar switch at the front end of the power supply to play the role of reliable control of total power supply and safety protection.
2. The 4-core waterproof joint is used to connect with the 4-core waterproof joint of the burner. The heating pipeline and the thermocouple wire are connected and docked.
3. There are two black sheathed wires with waterproof joints, which are connected to the infrared emitting head and the receiving head with glass window. The receiving head is a four-core cable, which is connected by the attached special extension cable. The receiving head on the back panel. Setting instructions
The following instructions are all performed when the controller's settings are in the factory state, the controller is connected to the thermocouple, and the power is turned on. Whether other interfaces are connected or not connected does not affect the setting operation.
After the controller is powered on, all the digital tubes and LED indicators will be lighted up. You can use this opportunity to check whether there are any missing or missing lights. Finally, the digital tube displays OFF, which is the shutdown state. In this state, the setting operation cannot be performed.
Press the start/stop button in the off state, the system enters the heating or standby state, and the digital tube displays the current temperature value and the gear position value respectively. The current temperature value is the temperature measured by the current thermocouple. When the gear position value is not activated, the display is 0. . In this state, you can perform the setting operation:
1. Modify the output power parameter of the electromagnetic pump: press and hold the setting button for about 5 seconds, the red digital tube displays d-1, indicating that the first power output parameter setting menu is entered, and then press the setting button, the green digital tube displays the current output of the gear. The percentage of power, at this time press the increase and decrease buttons, the power output parameters can be adjusted between 0-100.
★ Parameter confirmation save: adjust the parameters, press and hold the setting button, the number starts to flash until the red display SAU, indicating that the parameter is saved successfully, and the system exits the setting state.
★ After adjusting the first gear parameters, if you need to adjust other gear parameters, you can press the setup button again to return to display d-1, and the data is temporarily stored. Press the increase/decrease button to enter d-2, d-3 and other gears in turn, and set the parameters according to the above method. Finally, press and hold the setting button until SAU is displayed, and all parameters are saved before one time.
★If the above operation does not long press the setting button and display SAU, the new parameters will not be officially saved. If there is no operation for a few seconds or the system is started by pressing the start/stop button, the system will still run according to the original parameters.
★ d-1 first file default value 27.0; d-2 second file default value 33.0; d-3 third file default value 39.0; d-4 fourth file default value 46.0; d-5 five file default value 55.0.
2, modify the underlying parameters: display d-5 and then press the minus button, the digital tube shows the SP begins to enter the underlying parameter settings menu, and then press the minus button to display Ao1, SC, HHH, ddH, odH, oPP, SPP, SoP, UPo , SEP, PSF, bEn, dEn and other menus.
1 SP menu is the target temperature value option; default value: 190 ° C; setting range: 60-300 ° C.
★Parameter meaning: heating to this temperature stops preheating.
★ At this time, press the setting button, the digital tube will display the target temperature value, press the increase or decrease button to change the parameter, and the parameter confirmation save method is the same as before. The same applies hereinafter and will be omitted.
★ If you do not press any button for 5 seconds, the setting state will be automatically exited, and the parameter will not be memorized.
2 Ao1 menu is the ignition start temperature value option; default value: 130; setting range: 50-190 °C.
★ Parameter meaning: After reaching this temperature value, it is allowed to start work.
3 SC menu is the error correction value option; default value: 0; setting range: ±20 °C.
★ The meaning of the parameter is: When the current temperature is found to be different from the value measured by the standard thermometer, this value can be set according to the error value to correct the current temperature value to reduce the error.
4 HHH menu is the high temperature protection value option; default value: 450; setting range: 300-500 °C.
★ The meaning of the parameter is: After the temperature is reached, the system automatically protects, and the system forcibly stops the electromagnetic pump output.
5 ddH menu is the delay ignition time option; default value: 0; setting range: 0-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will be started after the corresponding time delay.
6 odH menu is the continuous ignition time option; default value: 6; setting range: 1-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will stop after the corresponding time.
7 The oPP menu is the boot gear option; the default value is 2; the setting range is 0-5.
The meaning of the parameter is: the output power gear value of the electromagnetic pump at the time of starting.
8 SPP menu is the shutdown gear option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 1 is automatically returned to the second gear after shutdown, and then the second gear is started. 0 is to keep the original gear after the shutdown, and then the original gear is activated.
9 SoP menu is the startup mode option; default value: 1; setting range: 0-1.
The meaning of the parameter is: when the parameter is 0, the system can only be started by pressing the start/stop button or by the precision adjuster; when the parameter is 1, the system adds the function that can be started by pressing the add button, the rocker switch or the right-hand precision adjuster. .
10 The UPo menu is the power-on automatic heating option; default value: 0; setting range: 0-1.
The meaning of the parameter is: 0 is the power does not automatically start heating, or it needs to be manually started after power-on. 1 is the power-on automatic start heating, it automatically starts heating after power-on, no need to press the switch to start.
11 SEP menu is a precision adjusted speed option; default value: 3; setting range: 1-30.
The meaning of the parameter is: the adjustment amount corresponding to the minimum angle of rotation of the external precision regulator can also be understood as the speed adjusted during rotation. The smaller the value, the finer the adjustment and the slower, and vice versa.
12 The PSF menu is the rate option for slowing down and downshifting; default value: 1 second; setting range: 0-3.
The meaning of the parameter is: If the default is 1st gear, it will open to 5th gear immediately after starting, the firepower will be added to 5th gear, or in 5th gear, immediately turn off to 1st gear, then it will be reduced to 1st gear, such as the number. The slower the increase and decrease, the slower, and the faster.
13 bEn menu is the fine-tuning button switch start and stop option; default value: 0; setting range: 0-1.
The meaning of the parameter is: 0 is the pressing start and stop function in the trimming switch, and 1 is on.
14 The dEn menu is a stable fire function option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 0 is the common regulation voltage to control the firepower, can not be fired automatically due to the external grid voltage change, 1 is the steady fire mode, the external grid voltage can change within a certain range, the firepower can work stably.
3, restore the factory settings: the controller is powered off, press and hold the minus button at the same time to turn on the power, display the rEc release button, long press the set button until the display SAU means that the factory settings are successful, all the parameters can be set at this time Both returned to the factory state.
Working process: Description under factory settings
Power on to the OFF state, press the Start / Stop button to enter the preheating state, the heating lamp lights up, the digital tube displays the current temperature and gear position, the output of the heating tube has an output of 220V to start heating, when the temperature reaches 130 °C, the status light Start flashing, the prompt can start the work manually, press the Start / Stop button, the status light turns to steady after the start, the ignition and electromagnetic pump vaporization start to have output and the corresponding indicator lights, after 6 seconds the ignition output stops. The indicator light goes out and enters the burning state. At this time, the output of the heating tube still has an output, and the heating lamp is still lit until the current temperature reaches the desired target temperature to stop the heating output and extinguish the heating lamp.
After the current temperature reaches the target temperature, if the operation is not started by pressing the “Start/Stop” button, the system enters the thermal insulation working state, and the heating and heating is automatically performed. The temperature of the burner is always maintained near the target temperature, ready to start working.
Firepower adjustment method: 1 Press the “increase or decrease” button during the combustion process, and the firepower will gradually increase and decrease the gear position according to the set value of the gear position. 2 Rotate the fine adjustment knob during the combustion process, the firepower can be continuously and smoothly adjusted.
Stop method: 1 Press the “Start/Stop” button during combustion. 2 Press “fine adjustment knob” during combustion. 3 In the combustion, turn the “fine adjustment knob” counterclockwise to the minimum firepower, and then rotate. 4 In the first state of combustion, press the “minus” button. 5 In the first stage of combustion, operate the rocker switch to downshift.
Power-on method: Press the “Start/Stop” button when the 1 status light is flashing. 2 Press the “fine adjustment knob” when the status light is flashing. 3 Turn the “fine adjustment knob” clockwise when the status light is flashing. 4 Press the Add button while the status light is flashing. 5 When the status light is flashing, operate the rocker switch to increase the gear.
After using the above 12 shutdown and then booting, it is started from the system default gear.
After using the above 345 to shut down and then boot, it is started from the first gear.
Shutdown method: Press and hold the “Start/Stop” button or “fine adjustment knob” for about 3 seconds during the stop or combustion work, and the system will enter the OFF state. Precautions:
★The temperature value does not rise and fall during the heating process, indicating that the polarity of the thermocouple is reversed, and the “LLL” will be displayed later.
★ The thermocouple open circuit will display HHH and the system protection will stop. It needs to be restarted after the fault is removed.
★ The process shows that “E-3” is a heating timeout failure. —— After the furnace starts to heat, the temperature does not reach the target temperature for a certain period of time, and the system automatically stops.
The reason, one: the gear flow setting is too large, generally appears in the maximum gear. The amount of pump oil exceeds the vaporization capacity of the burner. The vaporization removes too much heat, which exceeds the sum of the heat of the flame itself and the electric heating. Therefore, the temperature of the burner will gradually decrease. When the temperature is lower than the target temperature for a certain period of time, the system will automatically protection. Second, the temperature measurement thermocouple is faulty, which causes the temperature to not be measured correctly during the electric heating process, so the heating timeout occurs. In order to prevent loss caused by temperature loss at this time, this protection function is specially installed to minimize the problem of melting of the burner.
★When the starting temperature setting value is too low, the flame is unstable and the yellow flame is caused by insufficient vaporization.
★ If you find that the flame is unstable when you just click it, you can set the ignition to delay 1-2 seconds to start the ignition, so you can avoid the knocking phenomenon at the moment of starting. Especially for models with air defense, it is necessary to set up this frequently because of the frequent start-up. Practice shows that this works well.
DY2 basic parameters The DY2 high-energy igniter developed by the company is AC220V igniter. The shape of the spark is a flame, which is like an open flame. The ignition energy is strong, the performance is stable and reliable, and the ignition efficiency is high. It is widely used in commercial energy-saving stoves, boilers, burners, steamers, ovens and other commercial equipments that use gas and methanol as fuel. 1, product model: DY2. 2, the main function: delayed high-energy ignition, low-voltage jog switch start. 3, working voltage range: AC175V-245. 4, the service life: ≥ 100,000 times. 5, ignition intensity: high-energy ignition, [...]
75.00 $ Add to cartFunctional Overview BF-15B + microcomputer temperature difference controller, directly set the temperature difference upper limit to achieve the effect of temperature control of the water cycle, the panel is simple and convenient to operate. To make hot and cold water cycle, mainly by improving the thermal efficiency high and low temperature difference between the value measured by the sensor and the upper and lower limit set temperature difference. Mainly used in hot water circulation system backwater control. The main function Function Name Function Description Temperature control when the temperature difference T ≤T limit, normally open relay disconnected, normally closed pull; [...]
82.00 $ Add to cartHW-103 igniter: also known as industrial furnace pulse ignition controller, this product is mainly used for ignition and control of various industrial equipment and hotel stoves using liquefied gas, natural gas, artificial gas. Power-on ignition or switch-controlled ignition accidental flameout key ignition function, ion flame automatic monitoring function and flameout alarm, ignition failure and accidental flameout automatically cut off gas source safety protection, using microcomputer digital control technology, using lightning protection technology Power-on ignition/switch Control the ignition, stop the ignition after the flame is automatically detected, the solenoid valve keeps the combustion indicator light on, and when the ignition time [...]
92.50 $ Add to cartY2 commercial gas stove flameout safety protection ignition controller function description The controller is used on commercial stoves to realize automatic high-energy ignition and accidental flameout protection to meet the automatic control and safety protection of modern kitchen stoves. First, Y2 commercial stove flameout safety protection controller basic parameters 1, product model: Y2. 2, working voltage range: AC175-245V 3, service life: ≥100,000 times 4, ignition intensity: high-energy ignition, can easily ignite combustible gases and various alcohol-based biofuels. 5, there is an accidental flameout safety protection function, when the accidental flameout, the solenoid valve is closed and an alarm sounds. 6, [...]
158.75 $ Add to cartCommercial stove infrared anti-air burning controller function description The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process: The controller turns on the power switch, starts ignition, opens the air valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, [...]
177.50 $ Add to cartGN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
358.75 $ Add to cartAlcohol base material without fan electrification controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to conventional heating, temperature measurement, temperature control, inside igniter ignition high-voltage output, electromagnetic pump In addition to the functions such as built-in, there is also a model with its own precision fire regulation, which can realize stepless precision adjustment and start/stop control of the oil pump flow. This function and gear position adjustment realizes no need to switch, fire with [...]
415.00 $ Add to cartWater-cooled constant temperature electric vaporization controller description The controller adds water cooling thermostat function based on all the control functions and structural advantages of the GN-787E series electric vaporization controller. Combined with water-cooled electric vaporization burner, it can realize constant temperature vaporization, improve work stability and reliability, and is an upgraded product of electric vaporization. The controller is a plastic shell moisture-proof structure, with its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan. In addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output, etc. There [...]
440.00 $ Add to cartAlcohol based electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to conventional heating, temperature measurement, temperature control, inside igniter ignition high-voltage output, electromagnetic pump In addition to the functions such as built-in, there is also a model with its own precision fire regulation, which can realize stepless precision adjustment and start/stop control of the oil pump flow. This function and gear position adjustment realizes no need to switch, fire with heart, [...]
527.50 $ Add to cartDescription: Features: 1 out 1 and 1 out 2 can be freely used, can be used. This product is a piezoelectric igniter, the external material is PP plastic, mainly used in gas stoves / ovens, with an ignition needle to play an ignition role. Specifications: Item Type: Piezo Spark Ignition Set Material:Plastic Cable Length: 1 m/3.3feet Output Terminals: 2.3 mm/0.09inch Installation Hole: 18 mm/0.71inch Output Voltage: ≥18KV3PF Type: 1 Out [...]
360 Rotation BBQ Lighter USB Windproof Flameless Kitchen Plasma Ignition for Gas Stove Candle Barbecue Specification: Product size: Length 260mm Product material: aluminum + zinc alloy Product packaging: Blister packaging Charging port: type-C Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X BBQ Lighter 1 X USB Cable [...]
Gas Infrared Burner Igniter: Widely used in the ignition of industrial equipment gas burners in the fields of pre-coating treatment, drying and solidification, food baking, agricultural product drying, glass manufacturing, indoor and outdoor heating, paper making, printing and dyeing, etc. Control System. Gas igniter features: gas igniter, programmatic integrated IC control; two relays, to ensure the automatic adjustment of the circuit, safety protection, weak control, conversion circuit, etc.; high-quality insulation potting plastic packaging, more enhanced Security. The output high voltage is 16KV. In normal use, the flameout can be automatically re-ignited. When the timeout is 20 seconds, the gas solenoid [...]
77.49 $ Add to cartZQ1 alcohol based fuel steam controller system description First, the configuration: 220V electromagnetic pump; 220V fan; super ignition; start button compatible switch; wind pressure switch; lower water level probe; ignition needle; fire needle; status indicator. Second, the applicable products: Alcohol based fuel steam generator Third, the work process: When the start button is turned on, the fan runs immediately. When the wind pressure switch is turned on, the ignition starts and the 220V electromagnetic pump is started, and the alcohol-based fuel is sprayed. When the fire detector detects the flame controller, the ignition is stopped, and the system enters the [...]
96.25 $ Add to cartFully Automatic Electronic Ignition Gas Kitchen Blow Torch Refillable Cooking Torch Lighter for Desserts, BBQ, Soldering Specifications: Fuel: No Fuel Structure: One-piece Style: Outdoor Usage Condition: Normal Outdoor With Fuel or Not: No With Ignition Device or Not: Included With Wooden Handle or Not: No Dimensions and Weight: Product Size: as show Package Contents: Package Contents 1 x [...]
1, product model: DQ3. 2, the main function: delay super ignition. 3, working voltage range: AC175V-245. 4, the service life: ≥ 100,000 times. 5, ignition intensity: super ignition, can ignite flammable gas and various alcohol-based biofuels. The igniter can also ignite alcohol-based fuel when the ignition needle is wet, so it is especially suitable for igniting alcohol-based fuel. 6, ignition high pressure: ≥ 15Kv. 7, delay to stop the ignition time: turn on the AC 220V power supply, automatically stop the ignition after 12 seconds of ignition, time delay ignition can be determined according to customer requirements 8, the whole [...]
73.75 $ Add to cartPush Button Piezo Igniter Type of 1 Out 2 Electrode 200 Degree Resistance Wire Fit for Gas Fireplace Gas Oven Gas Heater lgniter Feature: This push button piezo igniter set can be used in gas stoves/ovens, with an spark ignition with 1m cable, and ignition needle to play an ignition role. This propain igniter push button with wire is easy to install. Keep the ceramic pin around 5 mm to the burner hole or it may not ignite gas, sparking distance: 2-3 mm. The universal push button igniter replacement is a piezoelectric igniter, external material is PP plastic, with [...]
Features: Made of high quality metal material, sturdy and durable. Mini size and lightweight design, perfect for travel camping, hiking, candles, cooking, fireplaces, fireworks and so on. All finishes are non-toxic, safe and Eco-friendly. Easy to carry and use. All parts are rounded smooth, avoids hurting your hands. Instruction: Gasoline refilling: 1. Unfold the cotton bar. 2. Press the gasoline bottle gently and add gasoline. Flint refilling: 1. Unscrew the liner screw. 2. Take out the original flint and put the new one into the liner. 3.Tighten the screws. Specification: Material: Copper Color: Golden Size: Approx. 3.6 x 2.3cm / [...]
51.24 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.