Additional information
Certification | CE / EU |
---|---|
Feature | Stocked |
Type | Kitchen Lighters |
Origin | Mainland China |
Model Number | CN1 |
Material | Plastic |
Plastic Type | Melamine |
Tanie Erotyczna bielizna intymna
Sklep online tanie
140.00 $
50 in stock
Certification | CE / EU |
---|---|
Feature | Stocked |
Type | Kitchen Lighters |
Origin | Mainland China |
Model Number | CN1 |
Material | Plastic |
Plastic Type | Melamine |
Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V
3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 600W
5, ignition output: AC220V, power is not more than 100W
6, electromagnetic pump / valve output: AC220V, power is not more than 100W
7, circulating water pump output: AC220V, power is not more than 1000W Wiring instructions
1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power supply to play the role of reliable control of the total power supply and safety protection. 2, red-black white sheathed wire: plug the fan.
3. Brown-blue black sheathed wire with cold-pressed round female insert: plug in electromagnetic pump/solenoid valve.
4. Black sheathed cable with black combination connector: plug the 220V igniter.
5. Small black sheathed wire brown-blue temperature sensor wire.
6. Red-black black sheathed wire with cold-pressed round male connector: The red wire is connected to the fire needle, and the black wire is connected to the burning ground of the burner.
7. Brown-blue black sheathed wire with cold-pressed flat female insert: circulating water pump. Automatic mode operation and job description
After power-on, press the combustion start/stop button to start in the oFF state. After starting, it will start to burn according to the current temperature less than the starting temperature. When the temperature is higher than the stop temperature, the combustion will stop. The starting sequence is -> pre-fan cleaning-> ignition-> oil pump 1-> Detecting flame-> After 10 seconds, open the oil pump 2. During the intermediate process, no fire is detected. After the automatic ignition for 10 seconds, if the flame is not detected, the error will be reported. Turn off the ignition, oil pump, and fan after cleaning 10; After the normal shutdown or when the stop temperature is reached, the combustion is turned off and the fan is cleaned. Timed On Reservation Mode Operating Instructions
After power-on, press the display time button in the oFF state, the timing indicator flashes, the time indicator light is always on, and the hour and minute digital tube displays 00,00. If you need to set the time, you need to enable it in the non-zero state. Zero state 5 seconds automatically start or manually press the time button to quickly start; when the setting is out of time, you can set the required time by pressing the hour or minute plus or minus button. The time countdown returns to 00,00 to start the system.
Cancel the reservation mode operation: Press the display time button in the display time state to cancel the current setting mode. timed off time mode operation instructions
Press the display time button in the working state, the timing indicator flashes, the time indicator light is always on, the hour and minute digital tube displays 00,00, if you need to set the time, you need to be in the non-zero state to enable, in the non-zero state for 5 seconds. Automatic start or manual press the time button to quickly start; when the setting is out of time, you can set the required time by pressing the hour or minute plus or minus button. When the time counts back to 00,00, the system is turned off.
Cancel time mode operation: Press the display time button in the display time state to cancel the current setting mode.
Control the combustion temperature setting operation instructions
Press the display temperature button in the working state or the reservation mode or time mode, the display temperature indicator is always on, the start temperature can be adjusted according to the increase or decrease of the start temperature, and the stop temperature can be adjusted according to the increase or decrease of the stop temperature; The set value can be confirmed, and it is automatically confirmed without pressing for 5 seconds. System parameter setting description
The following instructions are all performed when the controller's settings are in the factory state and the controller is powered on. Whether other interfaces are connected or not connected does not affect the setting operation.
After the controller is powered on, all the digital tubes and LED indicators will be lighted up. You can use this opportunity to check whether there are any missing or missing lights. Finally, the digital tube displays OFF, which is the shutdown state.
Press the start/stop button in the power off state, and the system enters the working state.
1. Modify the system parameters: Press and hold the setting button for about 3 seconds, and the red digital tube displays HEn.
★ Parameter confirmation save: adjust the parameters, press and hold the setting button, the number starts to flash until the red display SAU, indicating that the parameter is saved successfully, and the system exits the setting state.
★ Press the Set button to enter HEn, odH, oNF, oFF, obt, and set the parameters as described above. Finally, press and hold the Set button until SAU is displayed, and all parameters are saved before the one-time completion.
★If the above operation does not long press the setting button and display SAU, the new parameters will not be officially saved. If there is no operation for a few seconds or the system is started by pressing the start/stop button, the system will still run according to the original parameters.
1 HEn menu is the fire detection option; default value: 1; setting range: 0-1.
★Parameter meaning: 1 is to enable the fire detection function, 0 is to turn off the fire detection function, and the work process does not check the fire.
2 odH menu is the continuous ignition time option; default value: 12; setting range: 0-20 seconds.
★Parameter meaning: After the electromagnetic pump is working, the ignition output will stop after the corresponding time.
3 The oNF menu is the pre-cleaning option; the default value is 10; the setting range is 0-20 seconds.
★ The meaning of the parameter is: cleaning before starting the ignition.
4 The oFF menu is the post-cleaning option; the default value is 10; the setting range is 0-20.
★ The meaning of the parameter is: clean after turning off the fire.
5 The obt menu is the temperature option for the circulating water pump; default value: 35; setting range: 35-80 seconds.
★The meaning of the parameter is: when the water temperature is greater than or equal to this temperature, the circulating water pump is turned on less than the circulating water pump. Fault description: E-1: pseudo fire E-2: Ignition failure E-3: Unexpected flameout E-4: Open temperature line E-5: Thermal line short circuit
Main function description of commercial steam boiler ignition controller: First, the product features: 1, working voltage: 175V-245VAC 2, with water level detection, water shortage protection. 3, with wind pressure switch safety protection control fan, if no wind pressure switch, the wind pressure switch line is short-circuited. 4, with pseudo-fire, residual fire safety protection 5, with accidental flameout safety protection. 6, with a fault alarm prompt function. 7, control a 3V [...]
71.25 $ Add to cartBrand BESFUL Model LC-215B + Type of intelligent temperature control regulator Measuring range -20 ~ + 140 Measurement error -10 ~ + 10 the opening size 51x71 mm Installation type window mounted output signal 6000 mA Operating voltage 220 V Dimensions 55x75x85 mm Code Senation Job Description Setting range default value 1-H temperature difference 0-80 ℃ 10 ℃ 1-P temperature difference lower limit hysteresis 1-30 ℃ 5 ℃ PH collector plate antifreeze temperature control value -1-8 ℃ 3 ℃ HS ℃ high temperature zone temperature deviation correction value -10-10 ℃ 0 ℃ LS ℃ low temperature zone deviation correction [...]
88.00 $ Add to cartBasic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V 3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 600W 5, ignition output: AC220V, power is not more than 100W 6, electromagnetic pump / valve output: AC220V, power is not more than 100W 7, circulating water pump output: AC220V, power is not more than 1000W Wiring instructions 1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power [...]
140.00 $ Add to cartPortable Electric Arc Lighter USB Rechargeable Windproof Electronic Lighter Eco-friendly Aromatherapy for Candles Gas Stoves Feature: 1.Windproof and Flameless Technology: The Arc lighter adopt windproof design and flameless plasma technology to protect the electric pulse from being blown out by strong wind or wet weather. 2.Safty Protection: Its so much easier to light candles with this than traditional butane lighters or matches. A safety lock design keeps children away from fire. The long and flexible soft head allows you to keep a safe distance from sparks. 3.USB Charging: The lighter uses a lithium ion rechargeable [...]
GN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
377.50 $ Add to cartCommercial stove infrared anti-air burning controller function description The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process: The controller turns on the power switch, starts ignition, opens the air valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, [...]
177.50 $ Add to cartbody,td,th { font-family: Verdana, Geneva, sans-serif; font-size: 16px; color: #636363; } body { margin-left: 0px; margin-top: 0px; margin-right: 0px; margin-bottom: 0px; } a{ color: #636363; text-decoration: none; } a:hover { text-decoration: none; color: #636363; } a:active { text-decoration: none; color: #636363; } em { color: #BD1A1D; font-style: normal; font-weight: 700; } Culinary Torch Lighter Refillable Flamethrower Kitchen Cooking Torch with Adjustable Flame Safety Lock for BBQ Crafts CANQ889 Features: 1. Application - Great for flame, baking cake, seafood, melting cheeses and chocolates, bar cocktails, lighting a fire, cigars, BBQ , camping, jewelry making [...]
body, td, th { font-family: Verdana, Geneva, sans-serif; font-size: 18px; color: #636363; } body { margin-left: 0px; margin-top: 0px; margin-right: 0px; margin-bottom: 0px; } a { color: #636363; text-decoration: none; } a:hover { text-decoration: none; color: #636363; } a:active { text-decoration: none; color: #636363; } em { color: #BD1A1D; font-style: normal; font-weight: 700; } Culinary Torch Lighter Refillable Flamethrower Kitchen Cooking Torch with Adjustable Flame Safety Lock for BBQ Crafts LKS99 Features: 1. Application - Great for flame, baking cake, seafood, melting cheeses and chocolates, bar cocktails, lighting a fire, cigars, BBQ , camping, [...]
Fully Automatic Electronic Ignition Gas Kitchen Blow Torch Refillable Cooking Torch Lighter for Desserts, BBQ, Soldering Specifications: Fuel: No Fuel Structure: One-piece Style: Outdoor Usage Condition: Normal Outdoor With Fuel or Not: No With Ignition Device or Not: Included With Wooden Handle or Not: No Dimensions and Weight: Product Size: as show Package Contents: Package Contents 1 x [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.